2012-13 Arctic Cat Pro Climb 1100 Turbo M / Pro Cross XF 1100 Turbo / Pro Cross F 1100 Turbo Light Weight Performance Center Hood / Air Intake Kit / Headlight Delete.
Skinz ran this hood on their machine all last year and did not burn up one belt. The heat reduction is significant and the airflow through the hood keeps everything cool. The intakes in the hood now become vents that flow air out of the highest point in the hood preventing the chimney effect of heat trapping. They relocated the mass air flow sensor into the cold air intake at the nose of the machine and dramatically increased the area of the intake to allow more and constant cold air intake. The air no longer has to route through the ducting where it gets heated from the pipe and then make a U turn to get into the throttle bodies. The hood is all open and allows air movement along with deleting the headlight. The customer has the option of adding holes or additional venting in the open areas. All the panels install just like the OEM and fitment is exactly the same. There is no modifications necessary and the OEM hood can go back on the machine when the customer sells the machine or wants it stock again.
It replaces the center section with all the ducting and headlight. All the OEM side panels go back on with no modifications. The turbo unit gets the new Green filter and the pre-filter cover along with all the parts needed for a complete installation. These hoods have more venting and excessively more airflow. There are three large ports routed into the top of hood.
The original air intakes become flow vents to allow air to get out of the machine or flow through. It is important to know that on the turbo unit only the right side vent is used for taking air into the engine with the OEM setup. The left side is a dummy, its blocked off. In this kit, the customer drills the blocked off hole out and this also becomes airflow through the engine. The green performance filter which goes onto the OEM elbow and pulls air from the side vent. This dramatically reduces under hood heat increasing performance and extending belt life.
-Fits exactly like O.E.M.
-Includes Cold Air Intake
-All parts included to complete installation
-Engine compartment/clutches run 30% cooler
-Enables significant heat dissipation
-Additional venting possible
-9 lbs weight loss
-Significant increase in efficiency and power
-Extended Belt Life
-Weight savings of 10-10.5 lbs
MADE in the U.S.A.
|This product was added to our catalog on Wednesday 24 October, 2012.